Garage Door Services - Measuring for Your Garage Door

Measuring for
Your Garage Door

Measuring for Your Raynor Garage Door

Most new construction homes have standard size door openings for one- or two-car garages. However, if you need a non-standard or custom design, or are purchasing a Carriage House style door, we will need to know the measurements of your garage.

The information requested below is necessary to assure a proper selection of a new Raynor quality garage door.

Step 1: Door Opening Width

ft. in.

Step 2: Door Opening Height

ft. in.

Step 3: Headroom

ft. in.

Note: Standard Lift doors require a minimum of 12" of over door height. Not enough headroom? Don't worry. Raynor's Low Headroom Front Mount Springs package reduces the height requirement to 8-1/4" of over door height, while Low Headroom Rear Mount Springs require as little as 4" (plus 2" w/motor operator).

Step 4: Side Room

ft. in.

Note: A minimum of 3" side room is required with all models.

Step 5: Backroom

ft. in.

Note: The minimum backroom requirements are as follows:
Standard Lift—door height + 26"
Low Headroom Front Mount Springs—door height + 20"
Low Headroom Rear Mount Springs—door height + 29"

These minimum requirements are for the door only. Door openers may require additional backroom.

Step 6: Obstructions

Yes No

Note: Obstructions are defined as entry doors or other objects that will interfere with the garage door track or the operation of a garage door. The nearest obstruction may be something such as pipes, support beams, heating ducts, lighting, etc. Obstructions must be taken into consideration in the headroom, sideroom, and backroom measurements.

Name:
Company:
Street Address:
City, State Zip:
Phone:
Email:

Comments/Questions: